Step 1 of 2: Please provide information on your application needs
Application Information
Please provide a general description of the application.
 

What is the potential quantity this application may require?

Potential quantity:    

Operating Information
1. Drive
Reversing   
Continuous  
Stop-Start cycles/sec
RPM  
Manual  
2. Service
Maximum Torque  
3. Misalignments

   
Angular  degrees
Parallel  
Axial  
Skew  

4. Torsional Stiffness 
   

5. Inertial Limitation Mass Moment of Inertia
   

6. Weight
   

7. Environment
Temperature
   
8. Dimensional Properties
D. Maximum Outside Diameter
L. Maximum Length
S1. Shaft Diameter (Driving)
S2. Shaft Diameter (Driven)
BE  Between Ends
  Driving Description
  Driven Description:

9. Shaft / Coupling interface
Driver   Driven
Integral Clamp
2 Set Screws at 120º
2 Set Screw at 90º
1 Set Screw
Keyway

                
© Rocom Corporation. All rights reserved.
5957 Engineer Drive, Huntington Beach, California 92649 (714) 891-9922 or (800) 952-FLEX Fax (714) 891-2121 Email: Our Sales Department